150T Travel Lift
Lifting commercial and recreational vessels out of Darwin Harbour and back again, with lift planning matched to the vessel.
Marine lifting & hardstand — Darwin NT
Lift the Vessel.Get the Work Done.Get Back on the Water.
North Coast Shiplift operates a 150-tonne travel lift, hardstand and marine service facility at Frances Bay, Darwin — supporting commercial, government and recreational vessel operators across the Northern Territory.
Send your vessel details and we'll confirm suitability and availability.
150T
Travel lift capacity
Verified facility capacity
~40m
Vessel length
Approximate maximum
~10.2m
Vessel beam
Approximate maximum
Frances Bay
Darwin NT
Minutes from the CBD
Capability
One Facility, From Lift to Relaunch
Lifting, hardstand and marine works in one location on Frances Bay, so a vessel is handled from the moment it comes out of the water until it returns.
Hardstand
Space to work — inspections, coatings, engineering, fabrication and refit programs, for short stays or extended projects.
Marine Services
Antifouling, mechanical, electrical, fabrication, welding and shipwright works, directly or through approved marine contractors.
Frances Bay, Darwin
An established Territory facility minutes from the CBD, so vessels don't need to be relocated interstate for routine work.
Facility specifications indicate vessels up to approximately 40 metres in length and approximately 10.2 metres beam may be accommodated, within a 150-tonne lift capacity. Actual suitability depends on vessel design, displacement, draft, lifting points and configuration, and is confirmed by North Coast Shiplift for each vessel before any lift is arranged.
Services
Everything the Vessel Needs While It's Ashore
Services are delivered by North Coast Shiplift and by approved specialist marine contractors working within the facility, subject to site, safety, insurance and operational requirements.
Lifting & Hardstand
- Vessel lifting and launching
- Hardstand positioning
- Pressure washing
- Slipping for survey
- Short and extended hardstand
Coatings & Hull
- Antifouling
- Surface preparation
- Sandblasting
- Marine painting
- Fibreglass and gelcoat repairs
Engineering & Mechanical
- Engine and auxiliary work
- Shafts, sterngear and props
- Hydraulics and deck machinery
- Electrical and electronics
- Refrigeration
Fabrication & Structural
- Steel and aluminium fabrication
- Stainless and general welding
- Hull and framing repairs
- Shipwright services
- Vessel modifications and refits
Commercial
Working Vessels, Back in Service
Planned maintenance, survey preparation, unexpected repairs and refit programs for Territory operators.
Fishing and seafood
Pearling and aquaculture
Charter and tourism
Marine construction and civil works
Survey, research and monitoring
Government and institutional fleets
Coastal and offshore support
Recreational
Yachts, Powerboats & Catamarans
Antifouling, hull repairs, mechanical and electrical works, upgrades and refits for private vessel owners.
Commercial fishing vessels
Workboats and tugs
Charter and tourism vessels
Government and institutional vessels
Survey and research vessels
Motor yachts and sailing vessels
Powerboats and cruisers
Catamarans and multihulls
Recreational trailerable and moored vessels
Process
How a Lift Works
01
Send your vessel details
Length, beam, draft, approximate displacement, hull type and the work required.
02
Suitability assessment
Our team reviews the vessel against lift capability and facility requirements.
03
Scheduling
Confirm dates, expected hardstand duration and the trades involved.
04
Lift and works
Vessel is lifted, washed down and positioned so the works can be completed.
05
Relaunch
Once works are complete and signed off, the vessel is returned to the water.
Location
66 Frances Bay Drive, Stuart Park
On Frances Bay adjacent to the Darwin marinas and only minutes from the CBD.
66 Frances Bay Drive
Stuart Park NT 0820
FAQ
Common Questions
What size vessels can be lifted?
The facility operates a 150-tonne travel lift and can accommodate vessels of approximately 40 metres in length and approximately 10.2 metres beam. Suitability for a specific vessel depends on design, displacement, draft and lifting points and is confirmed by our team.
Where is the facility located?
66 Frances Bay Drive, Stuart Park NT 0820 — on Frances Bay, minutes from Darwin CBD.
Is submitting an enquiry a confirmed booking?
No. An enquiry lets us assess your vessel, the work required and availability. A booking exists only once North Coast Shiplift confirms it with you.
Can I work on my own vessel?
Yes. Vessel owners are welcome to work on their vessels while they are in our yard, but all contracted works must be arranged through our office.
What are the yard access hours?
Yard access hours are 7:30am to 4:30pm Monday to Friday. Arrangements for after-hours access must be confirmed with our staff.
Can I stay on my vessel overnight?
No. Overnight stays are not permitted because our yard is secured outside business hours.
Do you work on recreational vessels as well as commercial?
Yes. The facility supports commercial, government, charter, fishing and workboat operators as well as private yacht, powerboat and catamaran owners.
How much does a lift cost?
Pricing depends on the vessel, the works and time required on the hardstand. Send your vessel details through the enquiry form and our team will respond.
What information should I provide with an enquiry?
Length overall, beam, draft, approximate displacement, hull material and configuration, the works you need and your preferred dates.
Ready to get your vessel out of the water?
Send your vessel details and the works required. Our team will confirm suitability and availability.